Tag Archives: Guest Post

Commonalities in our Journey

A Guest Post by Abby Goldsmith

When Nathan Barra asked me to write a guest post about why I write fiction, I hesitated.  It’s a good question, and one that I haven’t pondered in years.  I’ve been stuck in a rut.  Not writer’s block, but paralytic self-doubt, questioning everything about why I chose to pour so much of my life into a career as a novelist.  I’ve watched others rise from amateur to best-seller within less than half the time I’ve been struggling to get my novel series published.  I lag behind most of my peers, editing and rewriting and editing and rewriting.  I’m in danger of becoming a bitter, grizzled veteran.

Self-doubt is a cornerstone of every novelist’s life, I think.  When I talk to other aspiring novelists, I hear commonalities in our journey.  Most of us grew up with a love of reading.  Most of us received praise from readers who adored our stories.  Most of us bashed our heads against the harsh realities of the publishing industry, which seems to be shrinking from corporate mergers.  From there, our paths diverge in two directions.  Either we give up and quit writing novels, or we get published and continue onwards.

My path feels like the most extreme version of that.  Rather than hiking a trail towards success, I’m navigating a storm-tossed sea, hurled about by towering tidal waves.  The praise I receive is enough for a lifetime.  My failures are EPIC.  As for the part where I either get published or quit . . . I’m sailing between those routes, unable to get my novels traditionally published, unable to give up and quit.  I’m preparing to self-publish a completed six-book-series, and I’m nearly paralyzed with the fear that it will all go wrong.

Most people, even committed writers, don’t base every major decision of their life around the dream of becoming a bestselling author.  I suspect that most of my peers would have quit after more than decade of setbacks.  Why am I so driven?

Childhood.  That’s surely where most addictions and personality disorders form, and I suspect it correlates with dysfunctional families.  I won’t detail how troubled my childhood was.  Suffice it to say, I needed an escape.  So I walked for hours, listening to music, inwardly cheering as my characters delivered justice to their enemies, or proved their worth to those who doubted them.  Stories were my only way to feel powerful and in control.  That feeling was better than anything I could get elsewhere.  I was addicted.

By the age of twelve, I’d completed two novels, a series of short stories, and a trilogy of comic books.  A literary agent working with Random House, unaware that I was a child, read my first manuscript and sent a scathing rejection letter, including the phrase, “It sounds like a mentally challenged person wrote this.”  Upon learning my age, she offered to edit my manuscript and promote me as a child author, but I’d already taken her first letter to heart.  I decided that my stories were unfit to be shared with anyone.  They collected dust in shoeboxes.

In college, two of my student films were selected out of hundreds for special recognition, and received high praise in international film festivals.  I began a promising career as an animator.  With my confidence boosted, I dared to share chapters of a potential novel with an online critique group.  Their reactions astounded me.  Everyone in the group wanted to read more.  They tore each other’s work to shreds, and rightfully so, but my work was exceptional.

After years of being ashamed of my writing skill, I reversed direction all at once.  A dam burst.  Within the space of one year, I completed a 520,000 word manuscript, a 59,000 word manuscript between drafts of the big one, and an unfinished 70,000 word novel.  My boyfriend thought they were amazing.

Still worried that my skill was amateur, I asked for readers with trepidation.  Part of me expected scathing rejections.  Instead, I received a flood of support and praise that changed my life, and affects me to this day.

A programmer in New Zealand read all my manuscripts, and said, “SEND MORE!”  A teenager in Norway did the same, telling me that he’d missed classes to read them under his desk at school.  A woman I never met emailed me to say, “Whatever gift for storytelling exists, you have it.”  The artist of my favorite web comic offered to endorse my novels, after reading.  A coworker at my office tentatively agreed to try the big one.  He began reading it in his cubicle.  The next day at work, he said, “I got no sleep.  I stayed up all night turning pages!  You’ll have no trouble getting published, so stop worrying.”

And I did.  From that point forth, I’ve considered myself a talented storyteller, although my prose and craft needed seasoning, and there are always aspects where I can improve.  Literary agencies and publishers rejected those early manuscripts due to the usual bouquet of amateur issues:  Point of view head hopping, passive voice overused, weak verbiage, and other problems that are familiar to career-minded writers.

To improve my craft, I went to the Odyssey Writing Workshop.  George R.R. Martin liked the first chapter of my big novel, Catherine Asaro privately praised my short story, and I felt as if my skill would leap ahead light years after all I learned from editor Jeanne Cavelos.  Encouraged, I scrapped the 520,000 manuscript and rewrote it from scratch, as two separate novels.  They’ve each been whittled down to the 90,000 to 105,000 word range.

Torth_banner_1176x446

I wish I could say that all that effort led to success.  It hasn’t.  At least, not yet.  The massive rewrite deadened the beginning, and I’ve had a hellish time trying to get it to appeal to the traditional publishing industry.  On top of that, I’m no longer the same person who wrote the original rough draft.  Fifteen years have passed.  I believe I understand why epic saga authors, such as Patrick Rothfuss, struggle to finish.  When a story has the weight of a magnum opus … when it feels too massive to do it justice … when the task requires decades of your personal life … well, I can only speak for myself, but there’s a damned lot of pressure to get it right.  A project that huge only happens once.  Humans don’t live long enough, or have enough energy, to do it twice.

I will write other novels.  I have other big stories to tell, after I publish this series (the first two books are the rewritten rough draft from fifteen years ago).  But this epic will always be more special to me than any others.  It’s the story that began in my teens, and spanned my twenties and thirties.  It’s the one that shaped the course of my life.

I write because I believe in my power to tell stories that amaze people, and leave them to reevaluate their world-views.

 

About the Author:Author
Stories and articles by Abby Goldsmith are published in Escape Pod, Fantasy Magazine, Suddenly Lost in Words, and several anthologies. She’s sitting on six unpublished novels, preparing for an epic debut. http://abbygoldsmith.com

 

Wattpad

A guest post by Emily Godhand.

Wattpad

At the Superstars Writing Seminar, I had the pleasure of meeting Wattpad’s own Ashleigh Gardner, a friendly and charming woman who gave a great speech on what Wattpad could offer budding writers as well as professional writers.

What is Wattpad?

It would be an easy mistake to describe Wattpad as “just a reading and writing app”.

While as of January 2015 it does offer over 100 million uploads of stories in over 50 different languages contributed by Wattpadders, and is often used by mobile readers and writers (85% of traffic!), it does so much more than just enable you to read or write a story.

What  makes Wattpad so unique is the ability for readers to interact with those stories they love so much through in-line comments, and for writers to not only respond to the feedback, but to receive and post fan-made works of music, videos, and art.

What does Wattpad offer authors?

It would also be a mistake to describe Wattpad as a “publishing platform”.* Anyone over the age of 13 that has a working internet connection can post a story to share with the world. But Wattpad isn’t only useful for teenagers looking to get into writing, it offers many things to more established or professional-minded authors as well.

*though authors would be wise to take note of editors who state they prefer works that haven’t been seen on the internet.

Visibility

Wattpad enables you to get your name out there and build a fanbase of people who recognize your name and works. This is truly especially if you are a young-adult writer, as most Wattpadders are under 30.

Feedback

Receive real time feedback, even line-by-line commentary, on what readers enjoy or disliked about your works. Build excitement for your works and get them talking amongst each other, or people they know, especially on other social media.

Why wait for a review that may or may not talk about specifics, when you could learn what lines or characters or scenes are working (or not working) for people?

((A preference for this differs by author; some people don’t like others in their kitchen and that’s fine. You can ignore it!))

Motivation

People look forward to your updates! If you have an update due, and your readers are expecting it, how can you justify disappointing them? If people are counting on you to write, you are more likely to glue butt to chair and get on it.

Connection with Fans

On that note, your readers and fans can comment their responses, questions, and comments in your stories, leave a message on your message board (‘wall’ like on Facebook’), or message you directly.

I never thought growing up that I’d ever be able to speak with the authors I loved reading, but here they are on Wattpad. I could send them a message at this moment or write a fan letter on their message board.  I remember one time I managed to track down this Indie author on Amazon and sent him a heart-felt message thanking him for his book, and how much it meant to me. I didn’t expect him to respond. But then…he did. And that means so much to readers.

Community

But with that, you not only create this community of supportive readers, but also fellow writers who can provide support and feedback.

You’re going to love it. 🙂

Guest Writer Bio:

Emily GodhandEmily Godhand is a cross-genre author who lives in a book fort in Denver, CO, with seven rats who revere her as their Queen.

As former psychiatric technician, she draws her inspirations from her work and the constant nightmares she’s had for 13 years. As such, her works tend to focus on an exploration of trauma, immortality, and human consciousness.

Read her latest work on Wattpad, where she is an Ambassador.

Orbit Xplorer

A guest post by Doug Dandridge.

I was going to write a post about Ginger, a software program that helps writers find errors in their manuscripts.  However, Ginger changed their interface to the point where it does not do all the stuff this writer was going to rave about.  So on to something else.

I write very detailed military science fiction, and I like to get things right as much as I can.  I’m sure I miss, but not from a lack of trying.  In the bad old days, I had to do everything by calculator and graph paper, but now the internet supplies the tools to really get down into the dirt of astrophysics.  There are a lot of programs out there that do a good job of simulating different types of orbital systems.  Programs like Universe Sandbox and others.  I love Universe Sandbox for simulating where asteroids are going to be at any given time in the future.  For detailed orbits of simpler systems, enter Orbit Xplorer by Ottisoft.  At $25 for a single site license the program, for all it can do, is a bargain.

OrbitXplorer

Orbit Xplorer comes with a number of preprogramed simulations, a star visits the sun (bad), double star (cool), Kepler’s laws (educational), two colliding stars (also really bad, but cool as well).  While useful, I found the simulations I could program to be much more useful, and I will give three examples below.

I wanted to work out Hohmann Transfer Orbits for a book idea about Mars.  Hohmann’s use a least fuel curving orbit to put a ship into Mars orbit from Earth, and can only be accomplished over certain timespans.  But for the book I wanted to see how much of a boost I could use to take days off of the transfer.  Using the program and trial and error I found the optimal boost to achieve a least time transfer, and discovered that any boost after that just sent the ship flying out into the outer solar system.

The second example was working out the orbits for a book that was to be the lead volume for the second Deep Dark Well trilogy (which has been written but not published).  The idea was that ancient humans had moved stars and planets into place, then put terraformed moons into orbit around some of the closer gas giants.  The program allows the user to put whatever objects he wants in orbit around each other, setting the mass of each body as well the distances of the orbits.  Again, it’s a trial and error process, and at some close distances the moons fall into the gas giant.  I set up a situation where all of the terraformed moons were as close as I could put them, so that their days (which are the same as one orbit around the gas giant) would be of reasonable lengths, none more than fifty some hours or so.  When I ran the program, everything orbited well for about fifty evolutions, as which point one moon curved in, hit another moon, and both collided with the gas giant (very bad), while one of the remaining moons was pulled out of orbit to go careening through the outer solar system, there to freeze (bad as well).  Oops.  Eventually I got it to run a thousand cycles without a disaster, and went with those orbits, which gave me the day night cycle of the moon of interest to the story, as well as the cycle at which phases of the other moons would be seen.

The final example is from my Exodus series, which has been called by some readers as a new level of worldbuilding.  I won’t even go into the central black hole with eight stars in orbit around it, all with their own system.  One of the systems I wanted as accurate as possible was the two Earth mass planets in orbits around each other, the capital world and it’s twin.  Both were habitable, and I also wanted the capital planet to have a terraformed moon in orbit.  So I modeled the two planets in orbit around each other first off, with the one parameter being that the day night cycle on both worlds would not be longer than about forty hours.  Anything longer might cause problems with the earth like vegetation on the worlds.  That was easy enough.  I had two beautiful planets that each had a bright world in the sky in one hemisphere at night, and experienced daily short lived eclipses on their day sides each light cycle.  The worlds were about ninety thousand kilometers or so apart, which would make each world many times larger than our moon in the sky of the other.  I then added the moon, and found that it would orbit the one world at about ten thousand kilometers in a slightly elliptical orbit.  I ran the simulation about a thousand cycles, and everything seemed to hold together.

One of the coolest things about a science fiction setting is how different we can make them.  Planets in orbit with each other around a center of gravity, moons in orbit around larger planets.  Multiple star systems.  One of the coolest things I found about Orbit Xplorer was how it sparked the imagination, suggesting setting I wouldn’t have otherwise thought of.  Setting can be another major character in your work, the more imaginative, the better.

Guest Writer Bio:
Doug DandridgeDoug Dandridge lives in Tallahassee, Florida, where he has worked as a full time writer since March of 2013. A graduate of Florida State University and the University of Alabama, and a veteran of the United States Army, Doug has been in love with the fantastic since an early age.  He has over twenty-five self published books on Amazon, and has a half dozen novels that have reached the top five in Space Opera in the US and UK.

Making a Multi-Use Banner

A guest post by Tim Reynolds.

Most writers I know are on a limited budget for advertising and promotion, especially the self-published ones. Even the writers with traditional publishers may have to foot the bill for some or all promotional supplies.

I, myself, am both self-published (4 books) and traditionally published. When I’ve done book signings in the past I had some nicely done 8×10 covers in frames on the table, with teasers about the book and even reviews. It looked well and good and…cheesy. At multiple-author events, the authors who got the most attention (and often the most sales) had a LARGE presence in the form of a banner.

Banners are great for signings, readings, and trade shows. The problem is that many authors have multiple books they need to promote, though seldom all at the same time. They might have a signing for their YA novel tomorrow, then a reading for their sci-fi opus on Sunday, and have a table set up at World Fantasy Convention next week. You want your banner to promote your product, but that’s three products, which makes for three banners. Banners aren’t cheap. The stands can be reused, but a banner for each book gets prohibitively expensive.

My solution? An adaptable, multi-use banner.

STEP ONE: Design a banner that covers as many of your bases as possible, without using any specific titles. This is the hardest step. Many of you will want to get your banner professionally designed. I have a background in graphics, so I did my own.

Tim Banner
My author banner. 30″ x 72″

Here’s mine. It’s 30″ x 72″. I’ve cropped off the bottom because it’s not important right now. If you can’t read what it says, here it is:

“Timothy Reynolds. Spinner of Tales, Fabricator of Fictions, Twister of History. ‘Canada’s Modern-Day Aesop’ ~ Barbara Budd, CBC Radio.

That’s my namea catchy/cute way of saying what I do, and the best promo quote I have. It also has my author photo, a moon with a bloody screaming face, and a generic city scape at night…to add atmosphere. Much of what I write has a dark element to it, so this is not a light and fluffy smiles-and-puppies banner.

There’s no publisher name at all. Not even my own company. Why? Because if I put Cometcatcher Press on it, then I can’t use it when I’m promoting “When Anastasia Laughs”, which will be published by Tyche Books in 2016, or “Tesseracts Seventeen” from Edge Science Fiction & Fantasy Publishing, which contains my short story “Why Pete?”.

Tim Foamcoare
Covers as photographs, mounted on foam core and laminated

STEP TWO: Have your cover(s) reproduced as photographs, mounted on foam core and laminated for protection. Almost every film lab can do this for you. I use Western Canada’s best: London Drugs.

I had all four covers done as 5x7s. Why? Because 5x7s are lighter than 8x10s and will remain in place better.

Magnetic Tape
Magnetic Tape

STEP THREE: You will need magnetic tape. It’s available at Michael’s Arts & Crafts and 10′ costs less than $5. Cuttwo 5″ strips for each cover. Because the strips will maintain their shape from when they were on the roll, take the strips and place them on a flat surface, under a heavy weight, overnight. Once they are flat, they are ready to use.

Cover and magnets
A cover and the magnetic Strips

STEP FOUR: Working on a clean surface, place a cover face down. Peel the backing off of the magnetic tape, and place two strips firmly on the back of the cover, centred left-to-right and down a bit from the top.

Peeling magnet paper
Peeling magnet paper off

Place the magnetic tape on the back of the cover. Press firmly.

Magnet back of cover
Place the magnetic tape on the back of the cover. Press firmly.


STEP FIVE: While the banner is hanging, place the cover where you want it to be, then place the second magnetic strip on the back of the banner, directly opposite the strip on the cover.

Back of banner
Magnetic strips in place on the back of the banner, holding the cover in place.

When it’s all done, you have a banner with one (or in this case, two) covers on display. You can do the same with the publisher’s logo and even a sign with the times you will be present. Other possibilities include: “Coming Soon”, “New York Times Bestseller”, or whatever your heart desires. Reviews, quotes, anything. All I suggest is to not overload the banner.

Covers on Banner
Two light-weight but sturdy covers magnetically attached to a banner.

The foam core is very light weight, as is the magnetic tape. I had considered using adhesive Velcro, but then the banner couldn’t be rolled up smoothly. This method with the magnets allows complete removal of the artwork and for the banner to be rolled and stored indefinitely without damage being done to its surface or shape. For a stronger attachment, put magnetic tape near the bottom of the cover as well.

(NOTE: I’m still not sold on the white borders I put on the covers, but with a sharp blade I can remove them easily.)

STEP SIX: Get yourself a 6×8 Rubbermaid lunch box for storing the covers, a hard plastic tube for the banner, and you’re all set for your next signing.

MATERIALS: Magnetic Tape: $5. Banner on heavy outdoor vinyl: $63 &Stand (includes carrying bag): $40 (both from Vistaprint), Plastic banner tube $21 from a local Digital Post store. BTW, VistaPrint is always having sales, so set up an account, do the design work, and wait. They will send you an email shortly with the latest sale. You can save anywhere from $10 to 33% of your entire order. Their online design & preview kicks ass, too.

Note: in some of the photos above you can see what look like creases on the banner. It was damaged in shipping. I called VistaPrint and explained the situation. Without seeing photos or getting witness statements, they immediately ordered a new one and it was shipped out the next day. It arrived in three days. Their customer service is second-to-none.

I hope this gives you some ideas and inspires you to get out there and promote your writing with a professional presence. Other things to help are bookmarks with the cover, where to buy it, and your website URL. If you don’t have your own website…GET ONE!

That’s it, that’s all.

Ciao for now,

Tim.

Tim ReynoldsTim Reynolds is a Canadian ‘Twistorian’, bending and twisting history into fictional shapes for fun & entertainment.

His debut novel, the urban fantasy, The Broken Shield, was released on July 21, 2014 on Amazon as a digital book and in March 2015 in paperback form. It covers over 2000 years of history and shows that even Lucifer knows “there’s an app for that”. His published short stories range from lighthearted fantasy to turn-on-the-damned-lights-now horror. His 100-word story “Temper Temper” was a winner of Kobo Writing Life’s Jeffrey Archer Short Story Challenge. In 2016 watch for his novel “When Anastasia Laughs” from Tyche Books.

He can be found online at www.tgmreynolds.com or @TGMReynolds on Twitter.